AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 346 01/2011 Installation and activation
exist already. If this is not the case, or if the field does not exist, they are assigned a
default number. If their value is 0, they will not be assigned any number. The only
exception is common subscriber which must always have a number.
The additional subscriptions field indicates the number of further internal subscriptions
to create.
The first DID field is used to create the external block 0 associated with the internal
number block [first, last]. Authorised characters are " 0123456789ABCDE". For this block
to be created, this number must belong to an incoming number plan.
The field first public DID is used to associate a public number (format: 0130967000 or
+33(0)130967000) with the DID number for block 0. This ASCII string will be truncated to
20 characters.
Managing the assignment of numbers to subscriptions:
Create a general-purpose subscription.
If automatic creation is authorised, for each subscriber equipment detected, create a
subscription, assign it a DID number (read in the external block), or assign it a voice mail
box if creation is authorised. Then update its LDAP directory record with the internal
number and possibly DID number. Then assign this subscription to the detected
equipment and then go to the next equipment.
After processing all the equipment, if automatic creation is allowed, create as many
additional subscriptions as necessary (and as possible). Assign them a DID number (read
in the external block) and a voice mail box if automatic creation is authorised, then update
their LDAP directory record with the internal number and possibly DID number.
• After the last line is validated, a summary of the network parameters is displayed for
confirmation.
• The screen then displays a summary of the configuration made.
To Next Page
Loading...
Need help?
General
