Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 347
> If the summary is not correct:
-Press "
r" to restart the preconfiguration.
> To leave the "T" mode and restart with the previous configuration without saving
the modifications
-Press "
n"; the system restarts with the previous configuration.
>If the summary is correct:
-Press "
y" if the values displayed are correct and confirm by pressing "Return".
The system then restarts automatically, and the its IP network link can be set up via the
LAN access.
Start-up is now complete and you can configure the site from the user interface.
Remarque :You can configure automatic or manual start of the SIP gateway or SNMP agent from the
AMP. By default, the SIP gateway is started, and the SNMP agent activated.
*-------------------------------------------------*
| SUMMARY:
|
*-------------------------------------------------*
| IPADR = 100.100.40.150 |
| NETWORKMASK = 255.255.255.192 |
| GATEWAY = 100.100.40.129 |
| NETWORKADR = 100.100.40.128 |
| BROADCAST = 100.100.40.191 |
|NAME = XL |
| IID = DOC |
| SUBSCRIBER = 3000 |
| DID = 4000 |
| NUMBERING LENGTH = 4 |
| COUNTRY = FRA |
| LICENCE = 4LMLMLLMLMLMLMLML |
| PARI = 123456789 |
| START UP TYPE = TOTAL
*-------------------------------------------------*
DO YOU WANT TO APPLY YOUR CHANGE Y(ES)/N(O)/R(ECONFIGURE) ? Y
To Next Page
Loading...
