ABB ACS580-07 - Page 116

SLOT 1
Option slot 1 (fieldbus adapter modules)
ANALOG IN/OUT
Analog input 11...3
Current/Voltage selection switch
for
analog input 1
AI1
Analog input 24...6
Current/Voltage selection switch
for analog input 2
AI2
Analog outputs7...9
Current/Voltage selection switch
for analog output 1
AO1
Auxiliary voltage output10...12
DIGITAL IN
Digital inputs13...18
STO
Safe torque off connection.
Reserved for internal use with op-
tions +Q951, +Q963 and +Q971.
34...38
Internal air temperature NTC
sensor connection
AIR IN
TEMP
Internal fan 2 connectionFAN2
Internal fan 1 connectionFAN1
Panel port (control panel connec-
tion, wired at the factory to the
control panel)
X12
Reserved to internal use.X15
EFB
EIA/RS-485 fieldbus connector
Bias resistor switchBIAS
S101
End termination switchTERM
S100
Connection terminals29...31
SLOT 2
Option slot 2 (I/O extension modules)
24 V AC/DC external power input40, 41
RO1 … RO3
Relay output 1 (RO1)19...21
Relay output 2 (RO2)22...24
Relay output 3 (RO3)25...27
4…6, AI2
7…9, AO1
10…12
13…15
1…3, AI1
16…18
X12
X15
SLOT 1
AIR IN TEMP
34…38
40, 41
19…21
22…24
25…27
SLOT 2
BIAS S101
TERM S100
EFB
FAN 2, FAN 1
116 Control unit