Lift the cabinet to its position. Maximum allowed angle of the lifting slings is 20° (10° for
frames R10 and R11, IP54).
Max. 20°
Max. 10°
R10, R11 IP54
￭ Moving the cabinet after unpacking
Move drive cabinet carefully in the upright position. Avoid tilting. The center of gravity of the
cabinet is high.
Moving on rollers
Lay the cabinet on the rollers and move it carefully
until close to its final location.
Remove the rollers by lifting the unit with a crane,
forklift, pallet truck or jack.
Mechanical installation 57
To Next Page
Loading...
