ABB ACS580-07 - Layout; Mechanical Installation; Necessary Tools and Instructions; Unpacking and Checking the Delivery

Layout
1
2
3
45
6
Mechanical installation (page 281)
Grounding screw1
Mechanical installation (page 281)
Hole for mounting screw2
Terminal designations (page 282)
2-pin terminal block for motor thermistor connection3
Terminal designations (page 282)
2-pin terminal block for relay output4
Terminal designations (page 282)
2-pin terminal block for external power supply5
LEDs (page 284)
Diagnostic LED6
￭ Mechanical installation
Necessary tools and instructions
• Screwdriver and a set of suitable bits
Unpacking and checking the delivery
1. Open the option package.
2. Make sure that the package contains:
• CMOD-02 multifunction extension module
• a mounting screw
• support part
Note:
The support part is needed for the following frame R1 drive types -02A7, -03A4,
-04A1, -05A7, -08A5 and -12A7.
3. Make sure that there are no signs of damage.
Optional I/O extension modules 281