ABB ACS580-07 - Categorization by Frame Size and Option Code; Quick Installation, Start-Up and Operating Flowchart

CodeName
Option manuals and guides
3AXD50000171828
Emergency stop, stop category 0 (option +Q951) for ACS580-07, ACH580-07 and
ACQ580-07 drives user's manual
3AXD50000171835
Emergency stop, stop category 0 (option +Q963) without opening main contactor with
safety relay for ACS580-07, ACH580-07 and ACQ580-07 drives user's manual
3AXD50000030058
CPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (+L537+Q971) user's
manual
3AFE68615500
FCAN-01 CANopen adapter module user's manual
3AUA0000141650
FCNA-01 ControlNet adapter module user's manual
3AFE68573360
FDNA-01 DeviceNet™ adapter module user's manual
3AUA0000068940
FECA-01 EtherCAT adapter module user's manual
3AUA0000093568
FENA-01/-11/-21 Ethernet adapter module user's manual
3AUA0000123527
FEPL-02 Ethernet POWERLINK adapter module user's manual
3AFE68573271
FPBA-01 PROFIBUS DP adapter module user's manual
3AUA0000109533
FSCA-01 RS-485 adapter module user's manual
Tool and maintenance manuals and guides
3AUA0000094606
Drive composer start-up and maintenance PC tool user's manual
3BFE64059629
Converter module capacitor reforming instructions
Categorization by frame size and option code
Some instructions, technical data and dimension drawings which concern only certain frame
sizes are marked with the symbol of the frame size, for example, R7. The frame size is
marked on the type designation label, see Type designation label (page 47).
The instructions, technical data and dimension drawings which concern only certain optional
selections are marked with option codes (such as +L504). The options included in the drive
can be identified from the option codes visible on the type designation label. The option
selections are listed in section Type designation key (page 47).
Quick installation, start-up and operating flowchart
SeeTask
Guidelines for planning the
electrical installation (page 63)
Plan the electrical installation and acquire the accessories needed (cables,
fuses, etc.).
Check the ratings, required cooling air flow, input power connection, compat-
ibility of the motor, motor connection, and other technical data.
Technical data (page 171)
Ambient conditions (page 213)
Check the installation site.
Mechanical installa-
tion (page 51)
Unpack and check the units (only intact units may be started up).
Examine that all necessary option modules and equipment are present and
correct.
If the drive has been non-opera-
tional for more than one year,
the converter DC link capacitors
need to be reformed (Reforming
the capacitors (page 166))
Mount the drive.
28 Introduction to the manual