ABB ACS580-07 - Recommended Annual Maintenance Actions by the User; Recommended Maintenance Intervals after Start-Up; Cleaning the Interior of the Cabinet

￭ Recommended annual maintenance actions by the user.
TargetAction
IP42 air inlet and outlet meshes on the cabinet doorsI
IP54 air filters on the cabinet doorsR
Quality of supply voltageP
Spare partsI
Capacitor reforming, spare modules and spare capacitorsP
Tightness of terminalsI
Dustiness, corrosion or temperatureI
Heat sink cleaningI
￭ Recommended maintenance intervals after start-up
Years from start-upComponent
181512963
Cooling
Main cooling fans
RRMain cooling fans (frames R6 to R11)
Auxiliary cooling fans
RRAuxiliary cooling fan for circuit boards (frames R6 to R9)
RRSecond auxiliary cooling fan (frames R8 to R9)
RRCircuit board compartment cooling fans (frames R10 and R11)
Cabinet cooling fans
RRCabinet cooling fan, door (frames R6 to R9)
RRCabinet cooling fan, 50 Hz, internal/door/IP54 (frames R10 to R11)
RRRCabinet cooling fan, 60 Hz, internal/IP54 (frames R10 to R11)
RRCabinet cooling fan, 60 Hz, door (frames R10 to R11)
Aging
RRControl panel battery (real-time clock)
4FPS10000309652
Cleaning the interior of the cabinet
WARNING!
Obey the instructions in chapter Safety instructions. If you ignore them,
injury or death, or damage to the equipment can occur.
WARNING!
Use a vacuum cleaner with an antistatic hose and nozzle. Using a normal vacuum
cleaner creates static discharges which can damage circuit boards.
1.
Stop the drive and do the steps in section Electrical safety precautions (page 20) before
you start the work.
2. When necessary, clean the interior of the cabinet with a soft brush and a vacuum cleaner.
136 Maintenance