ABB ACS580-07 - Unpacking the Transport Package; Checking the Delivery

￭ Unpacking the transport package
This drawing shows the layout of the horizontal transport package.


4
3
1
5
2
6
1
Timber5Bracket for attaching the drive to the wooden
pallet
1
Drive cabinet6Cardboard packing hood2
--Wooden pallet3
Unpack the horizontal transport package as follows:
1. Cut the strips (4)
2. Remove the hood (2)
3. Undo the screws that attach the bracket (1) to the wooden pallet.
4. Remove the plastic wrapping.
5.
After checking the delivery (see section Checking the delivery (page 55)), lift the drive
cabinet to its installation place (see section Lifting the cabinet (page 56)).
Unpack the vertical transport package as follows:
1. Undo the screws that hold the wooden elements of the transport crate together.
2. Remove the elements.
3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.
4. Remove the plastic wrapping.
￭ Checking the delivery
The drive delivery contains:
• drive cabinet
Mechanical installation 55
10