ABB ACS580-07 - Terminal and Connection Data for Auxiliary Control Circuits

Terminal and connection data for auxiliary control circuits
Maximum acceptable voltage and current values and wire sizes in terminal blocks are given
below.
Maximum acceptable voltage and current values and wire sizesTerminal block
230V AC / 24V DC, 2AX250
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
230V AC / 24V DC, 2AX289
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
230V AC / 24V DC, 2AX290
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
230V AC, 4AX300
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
24V DCX951
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
24V DCX969
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
24V DCX3
• Solid wire 0,14...4 mm2 (28...12 AWG)
• Stranded wire 0,08...2,5 mm2 (28...14 AWG)
230V AC / 24V DC, 2AX504
• Solid wire 0,25...2,5mm2 (24...12 AWG)
• Stranded wire 0,25...2,5 mm2 (24...14 AWG)
480V AC, 20AX601.1
• Solid wire 0,75...16 mm2 (18...6 AWG)
• Stranded wire 0,75...16 mm2 (18...6 AWG)
230V AC / 24V DC, 2AX601.1
• Solid wire 0,2...2,5 mm2 (24...14 AWG)
• Stranded wire 0,2...2,5 mm2 (24...14 AWG)
210 Technical data