6
21
17
18
8
7
4
4
3
1
5
2
A
B
C
5
11
10
13
15
16
12
20
9
19
14
Auxiliary voltage transformer T2110Cabinet door closedA
Input cable connection terminals11Cabinet door openB
Main switch-disconnector (Q1)12Cabinet door open, mounting plates and cabinet
shrouds removed
C
AC fuses13Drive control panel1
Main contactor (Q2, option +F250)14Operating switch2
Power cable connection terminals of the drive
module behind the shroud
15Main switch handle3
Drive module16Gratings for cooling air in4
Additional I/O terminal block (option +L504)17Gratings for cooling air out5
Drive control unit18
Mounting plate, see section Mounting plate – R6
to R9 (page 36)
6
Common mode filter (option +E208)19Lifting lugs7
du/dt filter (option +E205)20Cabinet door fan8
Motor cable connection terminals21Power and control cable entries9
Note:
For drives with no du/dt filter (option +E205), the
motor cables are connected to the drive module
terminals.
Operation principle and hardware description 35
To Next Page
Loading...
