120Switches ........................................................................................
120PNP configuration for digital inputs (X2 & X3) ............................................
121NPN configuration for digital inputs (X2 & X3) ............................................
121Connection for obtaining 0…10 V from analog output 2 (AO2) .........................
122Connection examples of two-wire and three-wire sensors to analog input (AI2) ....
122DI6 as frequency input ........................................................................
122DI6 as PTC input ..............................................................................
123AI1 and AI2 as Pt100, Pt1000, Ni1000, KTY83 and KTY84 sensor inputs (X1) .....
123Safe torque off (X4) ...........................................................................
125Technical data .....................................................................................
8 Installation checklist of the drive
129Contents of this chapter ..........................................................................
129Checklist ...........................................................................................
9 Start-up
131Contents of this chapter ..........................................................................
131Start-up procedure ................................................................................
10 Fault tracing
133Contents of this chapter ..........................................................................
133Warning and fault messages ....................................................................
11 Maintenance
135Contents of this chapter ..........................................................................
135Maintenance intervals ............................................................................
135Descriptions of symbols ......................................................................
136Recommended annual maintenance actions by the user. ..............................
136Recommended maintenance intervals after start-up .....................................
136Cleaning the interior of the cabinet .............................................................
137Cleaning the air inlet (door) meshes (IP42 / UL Type 1 Filtered) ..........................
137Replacing the air filters (IP54 / UL Type 12) ..................................................
137Inlet (door) filters (IP54 / UL Type 12) ......................................................
138Outlet (roof) filters (IP54 / UL Type 12) .....................................................
138Heatsink ............................................................................................
139Fans ................................................................................................
139Replacing the door fan (frames R6 to R9) .................................................
140Replacing the cabinet fan (frames R6 to R9) .............................................
141Replacing the door fan (frames R10 and R11) ............................................
143Replacing the cabinet fan (frames R10 and R11, IP54) .................................
144Replacing the drive module main fans (frames R6 to R8) ..............................
145Replacing the drive module main fans (frame R9) .......................................
146Replacing the drive module main fans (frames R10 and R11) .........................
147Replacing the auxiliary cooling fan of the drive module (frames R6 to R9) ...........
147Replacing the circuit board compartment cooling fans (frames R10 and R11) .......
148Replacing the drive module (frames R6 to R9) ...............................................
154Replacing the drive module (frames R10 and R11) ..........................................
160Replacing the drive module (frames R10 and R11, IP54) ..................................
166Capacitors .........................................................................................
166Reforming the capacitors .....................................................................
Table of contents 9
To Next Page
Loading...
