Modify the Standstill Supervision settings
The Standstill Supervision functionality is not active by default. It can be added,
modified, and deactivated.
The CRB 15000 has support for both stop category 0 and stop category 1 for
Standstill Supervision. For other stops, only stop category 1 is available.
xx2100000251
Modify the global supervision settings
The global supervision functions are not connected to a specific safe zone or safe
range. They can be added, modified, and deactivated.
Continues on next page
128 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
3 Installation and commissioning
3.6.3 The SafeMove configurator app on FlexPendant
Continued
To Next Page
Loading...
