ABB CRB 15000 - Page 211

Disconnecting the base cabling
NoteAction
Valid for CRB 15000-5/0.95Cut the cable ties.1
xx2100000424
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
xx2300000761
xx2100000425
Remove the functional and protective earth cables
by removing the screw.
2
xx2100000426
Snap loose and disconnect the connectors:
• J1.DC+
• J1.DC-
• J1.CS
• J1.CP
3
Continues on next page
Product manual - CRB 15000 211
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the base cabling
Continued