ABB CRB 15000 - Page 212

NoteAction
xx2100000405
Disconnect the connectors from the drive board.
• D1.X1 from X1
• D1.DC+ from DC+
• D1.DC- from ground
4
Removing the base cabling
NoteAction
xx2100000406
Remove the attachment screws.1
xx2100000407
Pull out the cabling from the base.2
Continues on next page
212 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the base cabling
Continued