NoteArticle numberConsumable
M3x12 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue
For tubular cover of CRB 15000-
5/0.95.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
3HAB3413-312Flange socket head screw with
glue
Tubular cover, lower, used for
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Replace if damaged.
3HAC061327-076O-ring
Tubular cover, upper, used for
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Replace if damaged.
3HAB3772-166O-ring
Axis-4 cover, used for CRB
15000-5/0.95.
Replace if damaged.
3HAC061327-051O-ring
Axis-4 cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
3HAC061327-051O-ring
Cover inside housing
Replace if damaged.
3HAC075056-001Gasket
Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
3HAC061327-047O-ring
Housing cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
3HAC061327-047O-ring
Continues on next page
Product manual - CRB 15000 943
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.6.6 Replacing the axis-4 joint unit
Continued
To Next Page
Loading...
