Maintenance
67
3ADW000194R0611 DCS800 Hardware Manual f us
Maintenance
What this chapter contains
This chapter contains preventive maintenance instructions.
Reference: Service manual - publ. no.: 3ADW000195
Safety
WARNING! Read the Safety instructions on the first pages of this manual before
performing any maintenance on the equipment. Ignoring the safety instructions can
cause injury or death.
Maintenance intervals
If installed in an appropriate environment, the drive requires very little maintenance.
This table lists the routine maintenance intervals recommended by ABB.
Maintenance Interval Instruction
Heatsink temperature check
and cleaning
Depends on the dustiness of
the environment (every 6 to 12
months)
See Heatsink.
Cooling fan change Every six years See Fan.
To Next Page
Loading...
