Dimensional drawings
107
3ADW000194R0611 DCS800 Hardware Manual f us
Module D5
DCS800-S0x-0900
DCS800-S0x-1200
DCS800-S0x-1500
DCS800-S0x-2000
Weight appr. 110 kg
510
450
127.5 125 125
U1 V1 W1
55
276
400
461
483
102
earthing M12
C1
D1
325.5
65.5 25 50 50 50
Ø 14
17.75
44.5
80 69
773
400
85.5
17 26
for M10
22
Ø 14
17
26
34
1005
820
775
250
Minimum Top
clearance
A5_dim_a.dsf
Support
Support
min. 480
> 510
earthing
M12
100
Minimum
Bottom clearance
cable tray
with = 40 mm
height =39 mm
fan terminals
fan terminals
*
Mounting the converter module D5 inside an
enclosure
Two supports should be mounted inside the
enclosure in such a way, that they can carry the
converter's weight when placing the converter
later on. The minimum distance between the
supports should not be less then 480 mm
because of electrical clearance (DC busbars).
A L-shape support as indicated will allow to
place the converter temporarily close to the front
end of the support (weight still taken by a lifting
device) and then push it back to the back plate
of the enclosure. The upper and lower holes in
the back plate of the converter should be used
to fix the converter in that position.
Busbars in mm:
DC 80 x 10
AC 60 x 5
To Next Page
Loading...
