Technical data
70
3ADW000194R0611 DCS800 Hardware Manual f us
Regulatory Compliance
The converter module and enclosed converter components are designed for use in industrial environments. In EEA countries,
the components fulfil the requirements of the EU directives, see table below.
European Union Directive Manufacturer's Assurance Harmonized Standards
Converter module Enclosed converter
Machinery Directive
98/37/EEC
93/68/EEC
Declaration of Incorporation EN 60204-1
[IEC 60204-1]
EN 60204-1
[IEC 60204-1]
Low Voltage Directive
73/23/EEC
93/68/EEC
Declaration of Conformity EN 61800-1
[IEC 61800-1]
EN 60204-1
[IEC 60204-1]
EN 61800-1
[IEC 61800-1]
EN 60204-1
[IEC 60204-1]
EMC Directive
89/336/EEC
93/68/EEC
Declaration of Conformity
(Provided that all installation
instructions concerning cable
selection, cabling and EMC filters
or dedicated transformer are fol-
lowed.)
EN 61800-3 ➀
[IEC 61800-3]
EN 61800-3 ➀
[IEC 61800-3]
➀ in accordance with
3ADW 000 032
➀ in accordance with
3ADW 000 032/3ADW 000
091
North American Standards
In North America the system components fulfil the requirements of the table
below.
Rated supply voltage Standards
Converter module Enclosed converter
to 600 V • see UL Listing-
www.ul.com / certificate no.
E196914
Approval:
c
UL
us
The spacings in the mod-
ules were evaluated to
table 36.1 of UL 508 C.
Spacings also comply with
table 6 and table 40 of
C22.2 No. 14-05.
• or on request
UL types: on request
>600 V to 990 V EN / IEC xxxxx see table
above.
Available for converter
modules including field
exciter units.
EN / IEC types: on request
(for details see table
above)
To Next Page
Loading...
