Info/illustrationAction
Refitting the top cover on page 230Refit the top cover.3
Refitting the left side cover
Info/illustrationAction
xx1800000027
Place the left side cover into the guide
holes and press it into the locking posi-
tion.
1
Screws: Torx, countersunk screw M4x10 (6
pcs)
xx1700001900
Fasten with screws.2
Refitting the top cover on page 230Refit the top cover.3
Refitting the front panel
Info/illustrationAction
Refit the front panel using the location
pins.
1
Continues on next page
228 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.1 Opening the robot controller
Continued
To Next Page
Loading...
