Refitting the main computer fan
Note/IllustrationAction
xx2200001090
Place the main computer fan in the
bracket and secure with the screws and
cable ties.
1
Screws: Torx T10 (2 pcs)
Tightening torque: 0.7 Nm
Reconnect any connectors disconnected
at removal.
2
xx2300001551
Refit the fan bracket in the main com-
puter and secure the screws.
3
Screws: Torx T10 (6 pcs)
Tightening torque: 0.7 Nm
Concluding procedure
Note/IllustrationAction
Refitting the Connected Services gateway
on page 214.
If necessary, refit the Connected Ser-
vices gateway.
1
Closing the door on page 185.Close the door.2
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
3
Product manual - OmniCore V250XT Type B 201
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.3 Replacing the main computer fan
Continued
To Next Page
Loading...
