ABB OmniCore V250XT Type B - Page 274

Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2200001817
Refitting the DeviceNet board
Note/IllustrationAction
Insert the DeviceNet board into the slot
in the main computer assembly.
1
xx2300000921
Secure the screws that hold the Devi-
ceNet board unit.
2
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
274 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.15 Replacing the DeviceNet board
Continued