ABB OmniCore V250XT Type B - Page 311

Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Insert the cable grommet assembly into
the cover of the cabinet.
3
xx2100000845
Secure it with the screws.
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 311
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the cable grommet assembly
Continued