21060 26M N AA | X SER IE S
G5
| 73
Figure 8-21: Add/Assign Bluetooth application to Bluetooth interface
Select Bluetooth.
Click OK.
Click Send Changes to device.
On the Communication Setup tab, verify that the port list and the description both display
Bluetooth. See the figure below.
Figure 8-22: Verify Bluetooth application assignment
Start a new instance of PCCU to test the Bluetooth connection or close the current connection:
Start PCCU, from the top menu, and select Setup.
Under Communications/ PCCU Connect method, select Bluetooth.
Select Search for Bluetooth devices.
Verify that the XFC
G5
or XRC
G5
Network ID displays in the list of detected devices.
Select the device on the list and highlight.
Click Select.
To Next Page
Loading...
Need help?
General
