CELL-DYN
®
3200 System Operator’s Manual
5-21
9140181H—October 2001
Section 5 Operating Instructions
QC Set Up Menu
The [QC SET UP MENU] key is used to display a list of the QC files (see Figure 5.6)
and the following soft key labels:
X-B SET UP
LAB ID SET UP
QC LIMITS
SET UP QC FILE
CUSTOMIZE DISPLAY
CUSTOMIZE PRINTOUT
MAIN
This section discusses the procedures that are used to set up the QC files. Typically,
a QC file(s) is set up, then QC Limits are established. Therefore, the keys in the QC
SET UP menu will be discussed in this order.
Figure 5.7 X-B Set Up Screen
To Next Page
Loading...
