5-40
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Operating Instructions
Set Up Instructions
Section 5
To Change Color Settings
1. Press [SELECT COLOR] in the OPERATION SET UP MENU.
2. Use the Arrow keys on the keyboard to move the cursor to the desired
location in either the Foreground or Background columns.
3. Enter the number corresponding to the desired color from the list on the left
side of the screen. Press the Enter key to save the entry and move the cursor
to the next position.
NOTE: The one field which cannot be changed is Background for Main
body 1. This background must always remain black.
4. When all desired changes have been made, press [RETURN] to return to the
OPERATION SET UP MENU.
5. If the operator changes a color selection, then wishes to cancel the change and
keep the original setting, pressing [RESTORE PREVIOUS] while this screen is
still displayed will cancel all changes and restore the original color selection.
Pressing [RESTORE DEFAULT] will cause the screen colors to revert to the
configuration set at the factory prior to shipment.
To Next Page
Loading...
