Abbott CELL-DYN 3200 - Page 287

CELL-DYN
®
3200 System Operator’s Manual
5-135
9140181H—October 2001
Section 5 Operating Instructions
Customize Printout
The [CUSTOMIZE PRINTOUT] key is used to customize the printout format of the
Data Log. (See Figure 5.51.) The following soft key labels are displayed when the
[CUSTOMIZE PRINTOUT] key is pressed:
SELECT PARAMETER/
PLACE PARAMETER (The key alternates between the selections.)
STANDARD SELECTION
RETURN
The CUSTOMIZE PRINTOUT FOR DATA LOGscreen shows the order (from left to
right) in which the indicated parameters will be printed.
Select Parameter
The [SELECT PARAMETER] key is used to select a parameter designated by the
cursor. When the key is pressed, the selected parameter is highlighted, the label
changes to [PLACE PARAMETER] and a [CANCEL SELECTION] key is displayed.
Place Parameter
The [PLACE PARAMETER] key is used to display the parameter in the location
indicated by the position of the cursor.
Cancel Selection
The [CANCEL SELECTION] key is used to cancel the selection and display the
[SELECT PARAMETER] key.
Standard Selection
The [STANDARD SELECTION] key is used to configure the printout in the pre-
determined print group shown in Figure 5.49. When the key is pressed, the print
group is changed to the Standard Selection.
Return
The [RETURN]key is used to return to the main DATA LOGscreen.