CELL-DYN
®
3200 System Operator’s Manual
11-13
9140181H—October 2001
Section 11 Quality Control
8. Repeat steps 3-6 to write additional desired QC file levels to disk.
NOTE: The disk can store one QC file of each level. If more than one QC
file of each level is saved, the new data will overwrite the previous
data.
9. Remove the disk from the disk drive and send it to the CELL-DYN
Interlaboratory QC program for evaluation.
Print QC Log
The [PRINT QC LOG] key is used to print the entire QC log.
Return
The [RETURN] key is used to return to the QC MENU screen.
To Next Page
Loading...
