Safety Precautions
Adept Viper s650/s850 Robot with MB-60R User’s Guide, Rev D 15
1.4 Safety Precautions
• All personnel who install, operate, teach, program, or maintain the system must
read this guide, read the Adept Robot Safety Guide, and complete a training
course for their responsibilities in regard to the robot.
• All personnel who design the robot system must read this guide, read the Adept
Robot Safety Guide, and must comply with all local and national safety
regulations for the location in which the robot is installed.
• The robot system must not be used for purposes other than described in Section
1.3. Contact Adept if you are not sure of the suitability for your application.
• The user is responsible for providing safety barriers around the robot to prevent
anyone from accidentally coming into contact with the robot when it is in motion.
• Power to the robot and its power supply must be locked out and tagged out before
any maintenance is performed.
1.5 What to Do in an Emergency Situation
Press any E-Stop button (a red push-button on a yellow background/field) and then
follow the internal procedures of your company or organization for an emergency
situation. If a fire occurs, use CO
2
to extinguish the fire.
1.6 Additional Safety Information
Adept provides other sources for more safety information:
Manufacturer’s Declaration of Compliance (MDOC)
This lists all standards with which each robot complies. See “Manufacturer’s
Declaration” on page 16.
Adept Robot Safety Guide
The Adept Robot Safety Guide provides detailed information on safety for Adept robots.
It also gives resources for more information on relevant standards.
It ships with each robot manual, and is also available from the Adept Document Library.
See “Adept Document Library” on page 17.
DANGER: An Adept Viper s650/s850 robot can cause
serious injury or death, or damage to itself and other
equipment, if the following safety precautions are not
observed:
To Next Page
Loading...
Need help?
General
