Chapter 2: Setup
21
OsmoTECH PRO Multi-Sample Micro-Osmometer Service Guide
Function Description/use
ALIGNMENT Align the turntable and check the position
of the sample probe and cooling assembly
SYSTEM
UPDATE
Install software/firmware updates
• Press DIAGNOSTICS to choose from these functions
and tests:
Function Description/use
A/D Analog-to-digital circuit testing
Test Card Test card status
Sample probe Measure the sample probe resistance
Barcode Test the barcode scanner
Events View/export system events log
Printer Test the printer
LCD Inspect screen for dead pixels
Solenoid Executes multiple impacts
Motors Test the sample and block motors
Cleaning Clean and test the sample probe
Maintenance Log sample probe and cooling well
cleaning, preventive maintenance,
instrument repairs, and set an installation
date that serves as a baseline for system
reminders (preventive maintenance, etc.).
Service procedures involving Calibration and
Diagnostics functions are explained in the next two
chapters.
To Next Page
Loading...
Need help?
General
