Advanced Instruments OsmoTECH PRO - Appendix A: Product Specifications

55
OsmoTECH PRO Multi-Sample Micro-Osmometer Service Guide
Appendix A: Product specifications
Sample type
Aqueous-based solution
Units of measure
mOsm/kg H
2
O
Sample volume
30 ± 1 μL
Sample capacity
Multi sample
Test time
90 seconds (typical) to test single sample
40 minutes (typical) to test 20 samples
Power requirement
100to240 VAC (50/60 Hz) / 0.5 A
Power consumption: 60 W max.
Fuses (2): 250 V time delay (Type T) 1-Amp
Memory backup
Integral lithium cell; 10-year life (unpowered); not user-replaceable
Classifications
Protection class: I
Over-voltage category: II
Pollution degree: 2
Moisture protection: IPX0 (ordinary)
Communications
USB 2.0 Type A ports (2)
USB 2.0 Type B ports (1)
Ethernet 10/100, RJ45 connector port (1)
Operating conditions
Temperature: 18 °C to 35 °C (64 °F to 95 °F)
Humidity: 5to80% relative humidity (non-condensing)
Storage temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Dimensions (D x W x H)
15.3” D x 10” W x 18” H
(39 cm D x 25 cm W x 46 cm H)
Net weight
13.2 kg (29 lbs.)
Shipping weight
17.7 kg (39 lbs.)
Warranty
One-year limited warranty on workmanship and parts
Certifications