Chapter 5: Configuring settings
34
OsmoTECH PRO Multi-Sample Micro-Osmometer Service Guide
6. Press SAVE .
Entering the date and time manually
To enter the date and time manually (without
synchronizing to a server):
1. Press DATE & TIME and login.
2. Deselect the Use Time Server checkbox if it is
selected.
3. Enter the Date and Time.
4. Select a date and time format:
• To automatically set the date and time formats
based on the language settings on the instrument,
select Use Regional Format Settings (see Changing
the language in the OsmoTECH PRO User’s Guide
(p/n222005UG)).
• Otherwise, change the Date , Year, and Time
formats, and the Delimiter as needed.
5. Press SAVE.
6. Press Exit to return to the Settings menu.
7. Power on the instrument
Changing the screen brightness
To change the brightness of the LCD screen:
1. Press the LCD tab.
2. Move the slider right to increase brightness, or left to
decrease brightness.
3. Press Save to save the selected value.
Turning on the barcode scanner
You can enable or disable the barcode scanner and
adjust the scanner brightness.
To change the barcode scanner settings:
1. Press the Barcode tab.
2. Press Enable and change the scanner brightness as
needed, or press Disable.
3. Press Save.
To Next Page
Loading...
Need help?
General
