Advanced Instruments OsmoTECH PRO Service Guide

6
OsmoTECH PRO Multi-Sample Micro-Osmometer Service Guide
Supplies, Standards, and Controls
NOTICE: Use of consumable products—including
sample tubes, controls or calibrators—from other
manufacturers will impact the instrument warranty.
For information on references and controls, see Quality
control in the user guide.
To order supplies, standards, and controls, contact the
Advanced Instruments Customer Service Department
(see Contacting Advanced Instruments).
General supplies
Item Part Number
Disposable sample tubes 222825
Probe wiper rings 222840
30-μL pipette 222820
Pipette tips 800097
Swab cleaner kit 202850
Replacement evaporation cover 222081
Replacement turntable 112077
Replacement sample probe 222140R
OsmoTECH PRO User Guide USB drive 222005UG
OsmoTECH PRO Service Guide USB drive 222006SM
Calibration standards
Item Part Number
0 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA000
50 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA005
850 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA085
2000 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA200
Reference solutions and controls
Item Part Number
Clinitrol™ 290 Reference Solution
(ten 2-mL ampules)
3MA029
Osmolality Linearity Set (5 levels) 3LA028
Protinol™ Protein-Based Serum Controls
(3levels)
3MA028
Other standards
Item Part Number
100 mOsm/kg Calibration Standard
(ten 5-mL ampules)
3LA011
200 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA020
400 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA040
500 mOsm/kg Calibration Standard
(ten 5-mL ampules)
3LA051
900 mOsm/kg Calibration Standard
(ten 5-mL ampules)
3LA091
1000 mOsm/kg Calibration Standard
(ten 2-mL ampules)
3MA100
1500 mOsm/kg Calibration Standard
(ten 5-mL ampules)
3LA151
NOTICE: Advanced Instruments cannot
guarantee the stated instrument performance
specifications and accuracy of test results
unless Advanced Instruments brand
consumables are used with the instrument.
Use of consumables from manufacturers other
than Advanced Instruments is not
recommended and may adversely aect
system calibration, performance, operation,
and accuracy of test results.
Sample tips and cleaners are single-use
consumables; sample cross-contamination can
occur if sample tips and cleaners are re-used.
For information on obtaining these standards
and controls, see Contacting Advanced
Instruments.

Advanced Instruments OsmoTECH PRO Specifications

General

Brand	Advanced Instruments
Model	OsmoTECH PRO
Category	Measuring Instruments
Language	English