At the end of the season annually (in case of special operating conditions also weekly)
Position in
figure
Machine part Lubrication Note
16
Only machines with cutting device
XtraCut 17 and XtraCut 25:
grease knife lever.
(A)
500 bales after first use, then once
per season.
20 Brake leverage. (A) On the two sides of the machine.
15
Bearing on pick-up.
Applies to uncontrolled pickup: You
can only see the left and right
grease nipple after removal of the
side covers.
(A) On the two sides of the machine.
4. Maintenance and Lubrication
118 Baler Wrapper Combination
4900.LE.EN01
To Next Page
Loading...
Need help?
General
