Key Decal Explanation
PTO Speed
For this machine a PTO speed of 1000 revs/min is necessary.
33
Caution
Disconnect the plug of the power supply before you do work on the
machine.
34
Caution
Stop the tractor engine and remove the key before you do work on the
machine.
35
Warning: Risk of fire
Do not smoke near the machine.
36
Thread aligning
Thread aligning for net tying.
37
Warning: Sharp knives
Lock the net knife before you do maintenance and before you change
the net. You can only attach the net knife when it has tension applied.
38
Warning: Risk of falling
Do not ride on the machine.
39
Warning: Risk of entanglement
Never reach into the pick-up section when the tractor engine is running
and the PTO shaft is coupled.
40
Caution: Lift safe with crane
If the machine is lifted with a crane, use either a spreader or make sure
that the transport chain has a minimum length of 2.4 m (7.9 ft.)
41
Warning: Risk of impact
Keep out of the area of the wrapping ring, film knives and wrapping
table.
1. Safety
Baler Wrapper Combination 21
4900.LE.EN01
To Next Page
Loading...
Need help?
General
