4.15 Adjust the Disk Brake of the Net Tying Unit .......................... 136
4.16 Adjust the Shock Absorbers ........................................ 137
4.17 Adjust the Tension Arm of the Wrapping Ring ........................ 138
4.18 Adjust the Tension of the Film Stretching Unit ....................... 139
4.19 Adjust the Wrapper Frame Brake Tension ............................ 140
4.20 Lubricate the Tailgate and Tensioning Arm Rollers (only RPC 160 V) .... 141
4.20.1 Loosen the Belts ............................................... 141
4.20.2 Lubricate ..................................................... 141
4.20.3 Tighten the Belts ............................................... 141
4.21 Adjusting the Deļ¬ectors (only RPC 130 F) ............................ 143
4.22 Tensioning the Roller Chains (only RPC 130 F) ........................ 144
4.23 Lubricate the Rollers (only RPC 130 F) ............................... 146
5 Troubleshooting ......................................................... 147
5.1 Feed Guide Plate ................................................... 149
5.2 Manually Remove a Blockage From the Feed Channel Floor ........... 150
5.3 Bale Optimization (for stable bale sides) ............................. 151
5.4 Prevent Bales of Unusual Shape .....................................152
5.5 Replace a Transport Wheel .......................................... 153
5.5.1
To Prepare for the Procedure ....................................... 153
5.5.2 Remove the Wheel .............................................. 153
5.5.3 Install the Wheel ............................................... 154
5.6 Bale Twisted on the Wrapping Table ................................. 155
5.7 Defective bale shape ............................................... 156
6 Speciļ¬cations ........................................................... 157
6.1 Technical Speciļ¬cations ............................................ 159
6.1.1 Dimensions ................................................... 160
6.2 Shipment .......................................................... 161
6.2.1 Lift the Machine ................................................ 161
6.2.2 Attach the Machine to a Truck ...................................... 162
6.3 Disposal ........................................................... 163
7 Index ................................................................... 165
Table of contents
Baler Wrapper Combination
4900.LE.EN01