143
Safety Information
Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a definite
safety hazard.
Do not install substitute parts or make any unauthorized modification to the
instrument.
Capacitors inside the instrument may still be charged, even though the instrument
has been disconnected from its source of supply. Dangerous voltages, capable of
causing serious personal injury, are present in this instrument. Use extreme caution
when handling, testing and adjusting.
Safety Symbols
Table 6 shows safety symbols used on the instrument and in the manuals.
WARNING A warning alerts you to situations that could cause physical injury or damage to
the equipment. Do not proceed beyond a warning until you have fully
understood and met the indicated conditions.
Table 6 Safety Symbols
Symbol Description
The apparatus is marked with this symbol when the user should refer
to the instruction manual in order to protect the apparatus against
damage.
Indicates dangerous voltages.
Indicates a protected ground terminal.
Eye damage may result from directly viewing the light produced by
the Xenon flash lamp used in this product. Always turn the xenon flash
lamp off before removing it.
!
To Next Page
Loading...
Need help?
General
