Menu Example 2 The following exercise demonstrates how to use the menu recall feature
as a shortcut to set the COMMA command back to its original setting.
You must perform the steps in Menu Example 1 before you start this
example.
Recall
Shift > 1 Use menu recall to return to the COMMA command.
This returns you to the COMMA command, which was the last command
used before you exited the menu in the Example 1.
9: COMMA
v 2 Move down to the COMMA parameter choices.
The first parameter choice is OFF (the current setting from Example 1).
OFF
> 3 Move across to the ON choice.
Set the parameter back to its original value.
ON
Auto/Man
ENTER 4 Save the change and turn off the menu.
The meter beeps and displays a message to show that the change is now in
effect. You are then exited from the menu.
ENTERED
2
Chapter 2 Front-Panel Operation
A Front-Panel Menu Tutorial
37
To Next Page
Loading...
Need help?
General
