Agilent Technologies 35670A

CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO] command/query
Specifies the region included in the curve fit operation.
Command Syntax: CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO] OFF|0|ON|1
Example Statements: OUTPUT 711;":calculate2:cfit:freq ON"
OUTPUT 711;"Calculate:Cfit:Frequency:Auto OFF"
Query Syntax: CALCulate[1|2|3|4]:CFIT:FREQuency[:AUTO]?
Return Format: Integer
Attribute Summary: Option: 1D3 Curve Fit/Synthesis
Synchronization Required: no
Preset State: ON (+1)
SCPI Compliance: instrument-specific
Description:
To specify the full span send CALC:CFIT:FREQ ON.
To limit the region of the curve fit send CALC:CFIT:FREQ OFF. The commands,
CALC:CFIT:FREQ:STAR and CALC:CFIT:FREQ:STOP define the region of a curve fit over a limited
span.
Note This command is not trace specific. It ignores the trace specifier.
CALCulate
6-9