*CAL? query
Calibrates the analyzer and returns the result.
Query Syntax: *CAL?
Example Statements: OUTPUT 711;"*CAL?"
OUTPUT 711;"*cal?"
Return Format: Integer
Attribute Summary: Option: not applicable
Synchronization Required: no
Preset State: not applicable
SCPI Compliance: confirmed
Description:
The analyzer performs a full calibration when you send this query. If the calibration completes without
error, the analyzer returns 0. If the calibration fails, the analyzer returns 1.
This query is the same as the CAL:ALL? query.
Common Commands
3-2
To Next Page
Loading...
