Example statements. This field appears at the end of the syntax description. It contains two BASIC
output statements that use the command.
A return format description. This field is only used if the command has a query form. It tells you
how data is returned in response to the query.
An attribute summary. This field indicates whether one of the analyzer’s options must be installed;
identifies overlapped commands requiring synchronization; defines the command’s preset state and
specifies compliance with SCPI. A “confirmed” command complies with SCPI 1992. An
“approved” command complies with SCPI 1993. An “instrument-specific” command does not
conform to the SCPI standard.
A detailed description. This field contains additional information about the command.
2-2
To Next Page
Loading...
