Agilent Technologies 35670A Manual&Nbsp;

Standard Event Register Set
The Standard Event register set monitors GPIB errors and synchronization conditions. See
figure 1-11.
The Standard Event register set contains only two registers: the Standard Event event register and the
Standard Event enable register. The Standard Event event register is similar to other event registers, but
behaves like a positive transition register with all bits set to 1. The Standard Event enable register is the
same as other enable registers.
For more information about the behavior of the Standard Event register set, see the GPIB Programmer’s
Guide.
The Agilent 35670A’s Status Registers
1-20
1-11. The Standard Event Register Set

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English