DJOM Divide by j q
EXP Exponential
FFT Fast Fourier Transform
IFFT Inverse Fast Fourier Transform
INTEG Integrate
IMAG Imaginary Part
LN Natural Logarithm
MAG Magnitude
PSD Power Spectral Density
REAL Real Part
SQRT Square Root
XJOM multiply by j q
+ Add
- Subtract
* Multiply
/ Divide
Operands:
D1|D2|...D8 Contents of data registers
F1|F2|...F5 Contents of function registers
K1|K2|...K5 Contents of constant registers
Measurement Data (depends on instrument mode)
[1|2|3|4] specifies which channel the data was taken from. Channels 3 and 4 are only available with Option
AY6.
PSPEC[1|2|3|4] Power Spectrum
LSPEC[1|2|3|4] Linear Spectrum
TIME[1|2|3|4] Time Data
WTIME[1|2|3|4] Windowed Time Data
FRES[21|31|41|43] Frequency Response
CSPEC[21|31|41|43] Cross Spectrum
COH[21|31|41|43] Coherence
HIST[1|2|3|4] Histogram (INST:SEL HIST only)
PDF[1|2|3|4] Probability Density Function (INST:SEL HIST only)
CDF[1|2|3|4] Cumulative Density Function (INST:SEL HIST only)
TIME[1|2|3|4] Unfiltered Time (INST:SEL HIST only)
Command Syntax in the Agilent 35670A
2-9
To Next Page
Loading...
Need help?
General
