CALCulate[1|2|3|4]:CFIT:COPY command
Copies the synthesis table into the curve-fit table.
Command Syntax: CALCulate[1|2|3|4]:CFIT:COPY SYNThesis
Example Statements: OUTPUT 711;"calc:cfit:copy SYNTHESIS"
OUTPUT 711;"Calculate:Cfit:Copy SYNTHESIS"
Attribute Summary: Option: 1D3 Curve Fit/Synthesis
Synchronization Required: no
Preset State: not applicable
SCPI Compliance: instrument-specific
Description:
The synthesis table must be in pole-zero format. To convert a synthesis table to pole-zero format, use the
CALC:SYNT:TTYP PZER command.
Note This command is not trace specific. It ignores the trace specifier.
CALCulate
6-5
To Next Page
Loading...
