ARM:RPM:INCRement command/query
Specifies the number of RPM in a step for RPM step arming.
Command Syntax: ARM:RPM:INCRement {<number>[<unit>]}|<step>|<bound>
<number> ::= a real number (NRf data)
limits: 1:500000
<unit> ::= [RPM]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements: OUTPUT 711;"ARM:RMP:INCR 10"
OUTPUT 711;"arm:rmp:increment 500"
Query Syntax: ARM:RPM:INCRement?
Return Format: Real
Attribute Summary: Option: not applicable
Synchronization Required: no
Preset State: +60 RPM
SCPI Compliance: instrument-specific
Description:
This command determines the size of each step used when RPM step arming is enabled with the
ARM:SOUR RPM command.
The first arm occurs when the RPM value reaches the threshold value (specified with the
ARM:RPM:THR command). Subsequent arms occur at the RPM interval specified with this command.
ARM
5-3
To Next Page
Loading...
Need help?
General
