CALCulate[1|2|3|4]:CFIT[:IMMediate] command
Starts the curve fit process.
Command Syntax: CALCulate[1|2|3|4]:CFIT[:IMMediate]
Example Statements: OUTPUT 711;":CALC3:CFIT"
OUTPUT 711;"calc:cfit:immediate"
Attribute Summary: Option: 1D3 Curve Fit/Synthesis
Synchronization Required: yes
Preset State: not applicable
SCPI Compliance: instrument-specific
Description:
The results of the curve fit are stored in the curve fit data register specified by the CALC:CFIT:DEST
command.
To abort the curve fit operation, send CALC:CFIT:ABOR.
Note This command is not trace specific. It ignores the trace specifier.
CALCulate
6-13
To Next Page
Loading...
Need help?
General
