CALCulate[1|2|3|4]:CFIT:TDELay command/query
Specifies a time delay value for the curve fit operation.
Command Syntax: CALCulate[1|2|3|4]:CFIT:TDELay {<number>[<unit>]}|<step>|
<bound>
<number> ::= a real number (NRf data)
limits: -100:100
<unit> ::= [S]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements: OUTPUT 711;":Calculate4:Cfit:Tdelay -19.0035"
OUTPUT 711;"CALC:CFIT:TDELAY 71.4756"
Query Syntax: CALCulate[1|2|3|4]:CFIT:TDELay?
Return Format: Real
Attribute Summary: Option: 1D3 Curve Fit/Synthesis
Synchronization Required: no
Preset State: +0
SCPI Compliance: instrument-specific
Description:
Use this command to include a time delay value which removes any time delay from the frequency
response to be fitted.
Positive delay is entered as a positive value.
Note This command is not trace specific. It ignores the trace specifier.
CALCulate
6-17
To Next Page
Loading...
