Applications The PACT Application
186 Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement
System, & Agilent 8166A Lightwave Multichannel System, Fourth Edition
NOTE If [Step] does not divide exactly into the difference between [λ Stop] and
[λ Start], the parameters are automatically corrected to meet the constraints of
PACT.
The PACT Reference Screen, as shown in Figure 136, appears. The number of
samples that each Power Meter will record and the output laser power are
displayed If <Continuous> was selected as the sweep [Method], the sweep
speed, [V Sweep], is displayed.
NOTE The application chooses the power, [P], see step 15 for more information.
Figure 136 PACT Reference Screen
To Next Page
Loading...
