Chapter 4 229
Assembly Replacement
Front Frame Subassemblies
Front Panel RPG
Removal/Replacement
1. Remove the front panel interface board. Refer to the “A3 Front Panel
Interface Board” removal procedure.
2. Unsolder the RPG, remove the nut and washer, and remove it from
the front panel interface board.
3. Place the new RPG in the correct position, tighten the nut and
washer, and resolder the leads.
4. Replace the front panel interface board. Refer to the “A3 Front Panel
Interface Board” replacement procedure.
To Next Page
Loading...
