Agilent Technologies FieldFox N9913A User Manual

126 FieldFox User’s Guide
 Then choose from the following:
o Internal FieldFox memory (default)
o SD Card An external SD Card (must be inserted)
o USB An external USB flash drive (must be inserted)
 Then Manage Sessions
 Then choose from the following:
o Name Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available number.
Learn how to use the labeler on page 164.
o Sort Arrange the listing of sessions by Name, by Date, or by (file) Size.
o Delete After a confirmation prompt, removes the contents of the selected
session from the list.
o Copy Copies the selected session to a different storage device, or the same
storage device with ‘Copy_’ appended to the beginning of the name.
o Copy All Copies ALL of the listed sessions to a different storage device, or
the same storage device with ‘Copy_’ appended to the beginning of the
names.
Record Playback Example
The following “Interval Recording” example shows how you can record spectral
activity over a longer period of time with less trace storage.
 Press Trace 6 then, with Trace = 1, press State then Max Hold
 Then Record Playback Setup
 Then New Session
 Then Recording Configuration
 Then Record Source to Trace1
 Then Record Interval to 10 s(seconds).
 Then Back
 Then Recorder Player
 Then Record At the end of each 10 second record interval, the Max Hold trace
is recorded and the Max Hold processing is reset for the next 10 second record
interval.
 Then Stop to end the recording.
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as
it was recorded.
 Press Trace 6 then with Trace = 1 and press State then Clr/Wr
 Then Record Player
 Then Play

Agilent Technologies FieldFox N9913A Specifications

General

Brand	Agilent Technologies
Model	FieldFox N9913A
Category	Measuring Instruments
Language	English