176 FieldFox User’s Guide
How to set Full Screen Mode
Press System.
Then Full Screen.
To Exit full screen Mode, press any key.
Preferences
FieldFox preferences are settings that survive a shutdown. When your FieldFox
is turned OFF, then back ON, these settings remain. All preference settings can
be restored to their factory defaults. Learn how on page 177
There are two ways to make FieldFox preference settings:
From softkey selections throughout the FieldFox menu structure. Do this to
temporarily try a setting, then press Save Current Settings (as preferences).
Learn how in the next section.
From the Quick Settings table.
Quick Settings Table
All preferences can be set from the Quick Settings table. They are immediately
saved as Preferences when Done is pressed.
How to view and change Preference Quick Settings
Press System 7
Then Preferences
Then Preferences
Press Next Page and Previous Page to view all settings.
To change a setting:
o Use the ▲|▼ arrows to highlight a setting.
o Then press Edit. The current setting changes to yellow.
o Some settings require you to press a softkey to change the value. Otherwise,
use the numeric keypad, ▲|▼ arrows, or rotary knob to change the value.
o When finished changing a value, press Done Edit
When finished changing ALL preferences, press Done. All changes are
immediately saved as Preferences.
To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:
To Next Page
Loading...
Need help?
General
